industries debris netting-manufacture,factory,supplier from China

Application scenariosConstruction: At construction sites, debris safety nets can be used to protect building walls, roofs, scaffolding and other areas to prevent debris splashing during construction from causing harm to workers and the surrounding environment.Equipment protection: In industries such as metallurgy and mining, large mechanical equipment may produce debris splashing during production.

Construction site:During construction, especially during blasting, demolition or high-altitude operations, industrial debris safety nets are widely used to set up safe isolation areas to prevent debris from splashing and injuring people.Mining:During mining, flying rocks and debris generated by blasting pose a serious threat to personnel and equipment.

Product Details:The edges of the netting are reinforced with pp rope, which makes it more solid after pressing the installation.

Close-mesh safety nets (whether or not they are called "Amazon Fragment Close-mesh Nets") are mainly used in the following high-risk places:Construction sites: Installing close-mesh safety nets on the periphery of buildings can form a dense protective barrier to prevent workers from accidentally falling and external debris from entering the construction site, thereby ensuring the safety of workers and the quality of construction.Mines and tunnels: During mining and tunnel construction, ore fragments, dust and other substances are prone to splash and injure people.

Blasting operations: In blasting operations, debris protection nets are used to block and intercept flying rocks generated by blasting, protecting the safety of surrounding personnel, equipment and buildings.

Building construction: In high-rise building construction, dense mesh is widely used to prevent construction workers, tools and materials from falling from high altitudes, as well as to block splashing gravel and debris, protecting people and equipment below from harm.Mining: In the process of mining, ore splashing and collapse are common safety hazards.

Production processThe production process of debris protection net includes the following steps:Material preparation: Select materials that meet the requirements, such as polyethylene, polypropylene, etc., and perform pretreatment such as stirring, heating, and drawing.Weaving or welding: According to the design requirements, the pretreated plastic wire is woven to form a mesh structure.

Production processThe specific production process of "2-meter debris net" is as follows:Raw material procurement: Select high-quality polyethylene, polypropylene or other corrosion-resistant materials as raw materials.Processing: Perform necessary processing on the raw materials, such as wire drawing, wire collection, etc., to meet the production requirements.Weaving or welding: Use a professional weaving machine to weave the processed materials into a mesh structure.Surface treatment: Anti-corrosion treatment is performed on the woven net to improve its corrosion resistance and serv

Production process of scaffolding debris netThe production process of scaffolding debris net varies depending on the specific product, including the following steps:Material preparation: Select high-quality polyethylene particles as raw materials to ensure the toughness and tensile strength of the product.Injection molding and wire drawing: Use a wire drawing machine to make plastic wires by wire drawing and stretching the raw material particles.

Production processThe production process of debris safety net mainly includes the following steps:Raw material procurement: Purchase natural plastic particles (such as high-density polyethylene) or recycled materials (such as mineral water bottle cap materials), and granulate them by mechanical crushing.Wire drawing or silk making: Process the raw materials into plastic wire, and control the cooling water temperature to ensure the thickness, color and flexibility of the plastic wire.Weaving: Use a close-mesh loom for weaving, control the weaving structure and weaving density of the close-mesh

Production processMaterial preparation: Select high-strength and weather-resistant materials, such as polyethylene (PE), as the raw materials for orange debris nets.Color matching: Mix orange pigments according to needs to ensure that the color is bright and meets safety warning standards.Weaving and molding: The prepared materials are woven through a weaving machine to form an orange debris net with high strength and good elasticity.Cutting and sewing: According to actual needs, the woven orange debris net is cut and sewn to meet the needs of different sizes and shapes.Quality inspection: The

Construction:During construction, yellow debris protection nets are widely used for safety protection in dangerous areas such as foundation pits, edges, and openings.

Production processThe production process of high-speed fan debris net varies depending on the specific design and includes the following steps:Design: According to the overall design and performance requirements of the fan, the preliminary design of the debris net, including size, shape, material, etc., is carried out.Material selection: Select suitable materials according to design requirements, such as high-strength plastic.Processing: The selected materials are processed into the required shape and size through processes such as stirring, spinning, weaving, etc.Surface treatment: The proces

High-altitude construction protection: During the construction of high-rise buildings, protective debris nets can be set up around the buildings to prevent workers from falling from heights or to prevent building materials from falling and injuring people.Safety isolation area: In construction sites, there are many dangerous areas such as deep pits and blasting areas.

Production processThe production process of debris mesh includes the following steps:Material preparation: Select materials that meet the requirements, such as polyethylene, polypropylene, etc., and perform pretreatment such as stirring, heating, and drawing.Weaving or welding: According to the design requirements, the pretreated wire is woven to form a mesh structure.

Production processThe production process of pink debris net is similar to that of general debris net, but special attention will be paid to the uniformity and durability of color:Material selection and pretreatment: Select suitable materials (such as polyethylene, nylon, polyester, etc.), and add colorants (such as pink pigments) as needed to ensure uniform color distribution.Weaving or stamping: For non-metallic meshes, weaving is usually used; in this process, it is necessary to ensure that the mesh aperture, shape and specifications meet the requirements and the color is uniform.Surface tre

Production processThe production process of cheap debris net is as follows:Raw material preparation: Select suitable raw materials according to needs, such as plastic, nylon, etc.Raw material processing: The raw materials are melted, drawn, weaved or cut to form the initial form of the net.Molding and cutting: The processed mesh material is cut and molded according to the preset size and shape.Quality inspection: The finished product is inspected to ensure that it meets the relevant standards and requirements.Packaging and delivery: The qualified debris net is packaged and then shipped out of

Production processThe specific production process of gray debris net varies according to product specifications and includes the following steps:Raw material preparation: Select high-quality raw materials such as polyethylene (PE) and determine the amount and ratio of raw materials according to product specifications.Weaving or pressing: Use advanced weaving or pressing technology to process raw materials into debris nets with specific pore size, wire diameter and thickness.Surface treatment: According to needs, the debris net is subjected to special treatment such as flame retardant and anti-

Crumb screen usually refers to the screen used in the material crushing process. It is mainly used to screen and filter the crushed materials to ensure the uniformity and stability of product quality.Production process of debris netThe specific production process varies depending on the materials used.

Blasting protection: During blasting operations, the debris protection net can block and intercept flying rocks generated by blasting, protecting the safety of surrounding personnel, equipment and buildings. At the same time, it also helps to reduce the impact of blasting operations on the surrounding ecological environment and protect the ecological balance.Construction site protection: On construction sites, the debris protection net can be used to block sharp objects such as glass fragments and steel bars to prevent workers from accidentally touching or being stabbed.

Blasting operation: Blasting is a common and efficient means in various engineering construction and mining. However, the flying rocks generated during the blasting process pose a huge safety hazard to the surrounding environment and personnel. Hercules debris protection net can effectively block and intercept these flying rocks and protect the safety of surrounding personnel and equipment.Construction: On construction sites, protection nets are often used to set up safe isolation areas, prevent falling objects from high altitudes from injuring people, and shield construction debris.

Since the production process of protective debris nets may vary depending on the specific type, material and purpose, the following is a general overview of the production process:Material selection: Select appropriate materials such as high-density polyethylene, synthetic fibers, etc.

The production process of heavy-duty debris netsThe production process of heavy-duty debris nets varies according to specific needs and includes the following steps:Material preparation: Select high-strength, wear-resistant, and tear-resistant materials, such as polyethylene, nylon fiber, etc.Wire drawing and weaving: First use a wire drawing machine to draw polyethylene into plastic wire, and then weave the material wire into a mesh structure according to design requirements.Surface treatment: Perform necessary surface treatment on the finished product, such as anti-corrosion treatment, sun p

The packaging of protective debris nets is usually determined according to product specifications, materials and transportation requirements. Generally speaking, waterproof and dustproof packaging materials such as plastic bags, cartons or wooden boxes are used to ensure that the products are not damaged during transportation and storage.