horizontal safety net-manufacture,factory,supplier from China

Building construction: During the construction process, horizontal protection nets are widely used in high-altitude working areas, such as the periphery of scaffolding and the edge of floors, to prevent the falling of construction materials and tools and protect the safety of construction workers and pedestrians below.Bridge construction: During the construction of bridges, especially in bridge types such as suspension bridges and cable-stayed bridges where high-altitude operations are frequent, horizontal protection nets are also essential safety equipment.Maintenance operations: In high-alti

Building construction: During the building process, horizontal safety nets are extensively used in high-altitude working areas, such as the periphery of scaffolding and the aspect of floors, to forestall the falling of development substances and equipment and defend the security of development employees and pedestrians below.Bridge construction: During the development of bridges, specially in bridge kinds such as suspension bridges and cable-stayed bridges the place high-altitude operations are frequent, horizontal safety nets are additionally crucial security equipment.Maintenance operations:

Construction site:Installed on the outside of the scaffolding, used to shield and protect the building under construction, prevent high-altitude falls and object strikes.Set up a horizontal safety net below the high-altitude working area to further enhance the safety protection effect.Land and hillside management:Similar to the application of dust nets or soil cover nets, cover the exposed land or hillsides to prevent dust and sand from being blown away by the wind and reduce soil erosion.Temporary enclosure:Use green scaffolding debris nets in areas that require temporary isolation or enclosu

Construction site:Installed on the backyard of the scaffolding to protect and guard the constructing below construction, stop high-altitude falls and object strikes.Set up a horizontal security internet beneath the high-altitude working vicinity to similarly decorate the protection safety effect.Land and slope management:Similar to the software of dirt nets or soil cowl nets, cowl the uncovered land or hillsides to stop dirt and sand from being blown away by way of the wind and limit soil erosion.Temporary enclosure:Use inexperienced scaffolding particles nets in areas that require transient i

Production process of dock safety netMaterial selection: Select appropriate materials according to the use environment and needs, such as high-strength polyethylene, polyester fiber, etc.Weaving and processing: Weave or process the selected materials according to specific specifications and sizes to form a mesh structure.Surface treatment: Surface treatment of the woven safety net, such as anti-corrosion treatment, anti-aging treatment, etc., to improve its durability and corrosion resistance.Quality inspection: Perform quality inspection on the completed safety net to ensu

Production processThe production process of loading and unloading dock safety net is similar to that of building safety net, but more attention is paid to the corrosion resistance and strength of the material.

The pallet rack safety net is a protective device designed specifically for pallet racks to prevent items from falling and causing safety hazards, provide stable support and protection, and ensure safety and efficiency in warehousing and logistics operations.Process flowThe process flow of the pallet rack safety net includes the following steps:Material selection: Select appropriate materials according to the use requirements, such as high-strength polyethylene, polyester fiber, etc.Wire drawing process: Mix the raw material polyethylene (HDPE) evenly, melt and stretch it through a wire drawin

Production process of building safety netBuilding safety net is a labor-intensive industrial product. Its production process requires multiple processes to complete, mainly including the following steps:Purchase of raw materials: The options include virgin plastic granules high-density polyethylene (HDPE).

The  safety net fall protection is a protective net set up in places where high-altitude operations are carried out or there is a risk of falling from heights. It is intended to prevent people or objects from falling, or to avoid or reduce injuries from falling and being hit by objects.We, Shengze Chemical Fiber Products Co., Ltd., are a professional safety net manufacturer.  Safety net fall protection is one of the products. Common fall prevention safety net materials include nylon, vinylon, polyester, polypropylene, polyethylene, nylon, steel wire, etc.

Safety net production processRaw material procurement: Select high-quality raw materials, such as virgin plastic granules high-density polyethylene (HDPE) or recycled materials (such as mineral water bottle cap materials) to ensure the strength and durability of the product.Wire drawing: The raw materials are drawn into uniform wires by machines. This link determines the toughness, color, thickness and strength of the rope net products.Weaving: Use professional textile machines to weave the drawn wires into a mesh structure.

Production processThe production process of safety debris net is as follows:Raw material preparation: Prepare raw materials such as net body, side rope, tie rope, etc.

Production processThe production process of scaffolding safety net includes the following steps:Material preparation: Select high-quality materials such as high-density polyethylene (HDPE) that meet the requirements to ensure the strength and durability of the safety net.Weaving and molding: The selected materials are woven through a weaving machine to form a net body with a specified aperture and density.Reinforcement treatment: The woven net body is reinforced, such as increasing the stitching strength of the edges, setting reinforcing ribs, etc., to improve the load-bearing capacity of the

Production ProcessSafety net materials:Choose high-strength, wear-resistant and corrosion-resistant materials, such as high-density polyethylene, polyester fiber, etc., to ensure the durability and load-bearing capacity of the safety net.The safety net should comply with national standards and have corresponding quality certificates and test reports.Support materials:According to the structure and size of the pallet rack, select appropriate steel pipes, fasteners, wire ropes and other materials as supports and fixings.Ensure that all materials are of qualified quality and meet relevant standar

Production process of safety isolation netDesign planning: Determine the specifications, size and materials of the isolation net according to the usage scenario and needs, and design the corresponding drawings.Material preparation: Prepare the required materials according to the design drawings, such as high-density polyethylene, polyester fiber, etc.Processing and production: Process the materials, such as wire drawing, warp knitting, cutting, etc., to produce the main structure of the isolation net.Roll-guide packaging: The cut mesh is guided into a roll and sealed with a plastic bag.Quality

Production processThe production process of anti-fall safety net includes the following steps:Material selection: Select appropriate materials such as nylon, polyethylene, etc. according to the use environment and requirements.Wire drawing and weaving: Use a wire drawing machine to make polyethylene into plastic wire, which is only the main structure of the anti-fall safety net. Then use a weaving machine to weave the wire into a mesh structure.

Production processMaterial selection: Select corrosion-resistant and wear-resistant materials that meet safety standards, such as high-strength fiber materials such as polyethylene or polyester.Net weaving: The selected materials are woven into a mesh structure through a professional weaving process to ensure the strength and stability of the net.Edge treatment: The edges of the net are reinforced, such as sewing edges, etc., to improve the durability and safety of the safety net.Quality inspection: The finished safety net is fully inspected for quality, including strength testing, corrosion r

Production processThe production process of the roof safety net includes the following steps:Material preparation: Select high-quality high-density polyethylene or other high-strength materials, and select appropriate raw materials according to needs.Wire drawing and weaving: Use a wire drawing machine to make polyethylene into plastic wire. Control the water temperature to ensure that the gloss, thickness and flexibility of the wire meet the standards.

Production processThe production process of warehouse safety net includes the following steps:Design: Design the size, shape, material and other parameters of the safety net according to the actual needs and safety standards of the warehouse.Material selection: Select high-strength polyethylene materials to ensure the durability and corrosion resistance of the safety net.Processing: The selected polyethylene material is processed by precise wire drawing and weaving to form a grid structure.

Production processThe production process of safety debris net (taking building safety net as an example) includes the following steps:Raw material procurement:Select suitable raw materials, such as virgin plastic particles or recycled materials (such as mineral water bottle cap materials), crush and granulate them by machine.Wire drawing and filament making:After the raw materials are heated and melted, they are drawn into plastic wires through a wire drawing machine.

Production process of anti-fall safety netThe production process of anti-fall safety net includes the following steps:Material selection: Select suitable materials such as nylon, polyethylene, etc. according to the use environment and needs.

Safety net production processThe safety net production process mainly includes the following steps:Purchase of raw materials: Commonly used raw materials include virgin plastic granules, high-density polyethylene (HDPE) or recycled materials (such as mineral water bottle cap materials), which are crushed and granulated by machines for use.Wire drawing: Also known as silk making, it requires precise control of the cooling water temperature to produce plastic wires with thickness, color, and flexibility that meet the requirements.Weaving: Use a dense mesh loom to weave plastic wire into a net, c

Production processThe production of building safety nets involves the following steps:Material preparation: Select high-quality plastic wire or other suitable materials as raw materials.Weaving process: Use a warp knitting machine or similar equipment to weave plastic wire and other raw materials in a specific weaving method (such as warp knitting knotless net) to form a net body.Reinforcement treatment: Set double-layer dense edges and double-layer mesh edges on the edge of the net body, and wrap the edge rope in the double-layer mesh edge to enhance the firmness of the net body.Cutting and f

Customized safety net is a safety protection product designed according to specific needs. It has the characteristics of high strength, wear resistance, and aging resistance.

Company ProfileShandong Shengze Chemical Fiber Products Co., Ltd. is a safety net company in Shandong, China, specializing in the production and sales of safety nets.