anti debris mesh-manufacture,factory,supplier from China

The packaging of protective debris nets is usually determined according to product specifications, materials and transportation requirements. Generally speaking, waterproof and dustproof packaging materials such as plastic bags, cartons or wooden boxes are used to ensure that the products are not damaged during transportation and storage.

Production process of scaffolding debris netThe production process of scaffolding debris net varies depending on the specific product, including the following steps:Material preparation: Select high-quality polyethylene particles as raw materials to ensure the toughness and tensile strength of the product.Injection molding and wire drawing: Use a wire drawing machine to make plastic wires by wire drawing and stretching the raw material particles.

Production processMaterial preparation: Select high-strength and weather-resistant materials, such as high-density polyethylene and polyester fibers.Wire drawing and weaving: Use a wire drawing machine to make polyethylene materials into plastic wires, and then weave the wires into a mesh structure according to design requirements.Surface treatment: Anti-corrosion and anti-aging treatments are performed on the isolation net to improve its corrosion resistance and weather resistance.Quality inspection: Perform quality inspection on the finished products to ensure that they meet relevant standar

Production processThe production process of debris safety net includes the following steps:Raw material procurement: Select high-quality polyethylene materials or other corrosion-resistant materials as raw materials.Wire drawing or wire making: Process the raw materials into fine or thick wires that meet the requirements.

Production processThe specific production process of "2-meter debris net" is as follows:Raw material procurement: Select high-quality polyethylene, polypropylene or other corrosion-resistant materials as raw materials.Processing: Perform necessary processing on the raw materials, such as wire drawing, wire collection, etc., to meet the production requirements.Weaving or welding: Use a professional weaving machine to weave the processed materials into a mesh structure.Surface treatment: Anti-corrosion treatment is performed on the woven net to improve its corrosion resistance and serv

Production processRaw material preparation: Select high molecular polymer materials such as polyethylene or polypropylene as the main raw materials, and add chemical additives such as anti-aging and anti-ultraviolet.Wire drawing manufacturing: The raw materials are made into mesh fabrics through the wire drawing process.Cutting and processing: Cut the mesh fabric into a size of 3 meters wide according to the needs, and perform necessary processing such as edge reinforcement, punching, etc.Quality inspection: Perform quality inspection on the finished product to ensure that it meets the relevan

Production process of fragment dense meshRaw material purchase: Select high-quality materials such as high-density polyethylene (HDPE) as raw materials.Wire drawing: The raw materials are drawn into plastic wires by machines, and the cooling water temperature is controlled to ensure that the thickness, color and flexibility of the plastic wires meet the standards.Weaving: Use a dense mesh loom to weave plastic wires into a net, control the weaving structure and density, and the mesh density is usually not less than 800 mesh/100 square centimeters.Needle sewing: Cut and sew the woven tubular me

The production process of heavy-duty debris netsThe production process of heavy-duty debris nets varies according to specific needs and includes the following steps:Material preparation: Select high-strength, wear-resistant, and tear-resistant materials, such as polyethylene, nylon fiber, etc.Wire drawing and weaving: First use a wire drawing machine to draw polyethylene into plastic wire, and then weave the material wire into a mesh structure according to design requirements.Surface treatment: Perform necessary surface treatment on the finished product, such as anti-corrosion treatment, sun p

The flame retardant debris net is woven with recycled mineral water bottle caps, which has excellent high temperature resistance and flame retardant properties, can effectively isolate the fire source and prevent the spread of fire, and also has anti-aging, corrosion resistance, and UV protection functions.

Production processThe specific production process of building debris protection net generally includes the following steps:Material preparation: Select high-strength, corrosion-resistant plastic or other synthetic materials as raw materials.Weaving or weaving molding: Weave the raw materials into a mesh structure according to the design specifications and mesh density requirements.

Production process of hail netRaw material preparation: Select high-quality polyethylene raw materials and add chemical additives such as anti-aging and anti-ultraviolet.Wire drawing manufacturing: The raw materials are drawn into filaments through a wire drawing machine to form the main material of the hail net.Weaving molding: The drawn filaments are woven into a mesh structure through a weaving machine to form the finished product of the hail net.Quality inspection: The woven hail net is quality inspected to ensure that it meets the relevant standards and requirements.Packaging and warehous

Production processSince the backyard particles internet is no longer a standardized product, its manufacturing system consists of the following steps:Material selection: Select substances appropriate for the backyard environment, such as plastic or artificial fibers with properly climate resistance.Design planning: Design the fantastic mesh dimension and structure in accordance to the size, structure and wishes of the garden.Processing and production: Use mechanical gear or hand equipment to technique the chosen substances into a mesh structure, and operate vital connection and fixing treatmen

Production processThe production process of debris safety net mainly includes the following steps:Raw material procurement: Purchase natural plastic particles (such as high-density polyethylene) or recycled materials (such as mineral water bottle cap materials), and granulate them by mechanical crushing.Wire drawing or silk making: Process the raw materials into plastic wire, and control the cooling water temperature to ensure the thickness, color and flexibility of the plastic wire.Weaving: Use a close-mesh loom for weaving, control the weaving structure and weaving density of the close-mesh

Highway and high-speed railway bridges: These bridges are designed for high speeds. Once an object falls from the bridge, it may have a serious impact on driving safety and the surrounding environment. Therefore, it is essential to install anti-throw nets on these bridges.Corridors and overpasses: Corridors and overpasses are often used for pedestrian passages. If an object falls from above, it is likely to cause harm to pedestrians. Installing anti-throw nets in these places can increase pedestrian safety.

Production processThe production process of debris mesh includes the following steps:Material preparation: Select materials that meet the requirements, such as polyethylene, polypropylene, etc., and perform pretreatment such as stirring, heating, and drawing.Weaving or welding: According to the design requirements, the pretreated wire is woven to form a mesh structure.

Production process of high-transparency meshThe production process of high-transparency mesh includes the following steps:Material preparation: Select high-quality raw materials, such as polyester fiber, high-density polyethylene, etc., to ensure the quality and performance of the product.Weaving process: Use advanced weaving technology to weave the raw materials into a mesh structure to form the basic form of high-transparency mesh.Surface treatment: Surface treatment of the woven high-transparency mesh, such as coating, sunscreen treatment, etc., to enhance its anti-aging, weather resistance

Production process of anti-fall netThe production process of anti-fall net varies depending on the material and purpose, and usually includes the following steps:Material preparation: Select high-strength and corrosion-resistant materials, such as nylon, polyethylene, etc.Wire drawing and weaving: According to the design requirements, the material is first drawn and then woven into a mesh structure.Edge treatment: The edge of the net is reinforced to ensure the firmness and durability of the edge.Quality inspection: The quality of the completed anti-fall net is inspected, including appearance

Production process of building meshThe production process of building mesh varies depending on the specific product type, and usually includes the following main steps:Material preparation: Select high-quality raw materials such as virgin materials or high-density polyethylene to ensure the strength and corrosion resistance of the product.Wire drawing and weaving: Use advanced weaving technology to process the raw materials into the shape of mesh.

Production processSince the particular manufacturing method of particles security nets varies from product to product, the following is the manufacturing process:Material preparation: Select superb uncooked materials, such as HDPE resin, etc., and reduce and pre-process them in accordance to product specifications.Weaving or weaving molding: The uncooked substances are woven into a mesh shape thru superior weaving tools or molding technology.

Production processSince the garden debris net is not a standardized product, its production process includes the following steps:Material selection: Select materials suitable for the garden environment, such as plastics and synthetic fibers with good weather resistance.Design planning: Design the appropriate mesh size and shape according to the size, shape and needs of the garden.Processing and production: Use mechanical equipment or hand tools to process the selected materials into a mesh structure, and perform necessary connection and fixing treatments.Quality inspection: Perform quality ins

Production system of particles netThe particular manufacturing method varies relying on the substances used. The manufacturing procedure of particles internet consists of the following steps:Material preparation: Select appropriate materials, such as polyethylene, nylon or polyester, and decide the aperture, form and specs of the mesh in accordance to the needs.Weaving or stamping: For non-metallic meshes, weaving or injection molding might also be used.

Building construction: In high-rise building construction, dense mesh is widely used to prevent construction workers, tools and materials from falling from high altitudes, as well as to block splashing gravel and debris, protecting people and equipment below from harm.Mining: In the process of mining, ore splashing and collapse are common safety hazards.

The production process of building debris netThe production process of building debris net generally includes the following steps:Material preparation: Select materials suitable for making debris nets, such as polypropylene (PP), polyethylene (PE) and other plastic materials.Cutting and weaving: According to the required size and specifications, the materials are cut into sheets of appropriate size and made into a mesh structure by weaving and sewing.Reinforcement: Reinforce the edges or key parts of the mesh to improve its bearing capacity and durability.Quality inspection: Perform quality in

Production processSince the precise manufacturing procedure of particles protection nets varies from product to product, the following is the manufacturing process:Material preparation: Select fantastic uncooked materials, such as HDPE resin, etc., and reduce and pre-process them in accordance to product specifications.Weaving or weaving molding: The uncooked substances are woven into a mesh shape thru superior weaving gear or molding technology.